The handgun slide cycler is a revolutionized one-handed mechanism engineered to facilitate the chambering or clearing of various semi-automatic handguns. It entails a tapered feed and notches that support a complete cycle from alternate angles by manipulating the front or rear sights, the slide itself, and optional electronic red dot optic sights. It is also equipped with a narrowing guide that accommodates the barrel and prevents the slide from advancing past the junction, thus maintaining a safe cycle of the handgun.

An operator will place the muzzle of a handgun into the top opening of the device, securing the barrel within the accommodating channel and halting the slide with the tapered feed, as a result, enabling the slide to cycle with a single hand in a controlled manner. The cycler features notches along the upper and lower areas of the apparatus that securely interface with the front, rear, and electronic red dot optic sight of a handgun. When the front, rear, or electronic red dot optic sight is placed on a notch, downward force is applied and the slide is displaced rearward while the barrel assumes position, effectively cycling the handgun.

The lower notches include two angled surfaces that provide a resting position for electronic red dot optics without damaging the optics reticle, ensuring optimal stability and engagement for seamless slide cycling. The lower notches are also secondary points of contact in case an operator fails to cycle the slide on the upper notches.

For ease of use, the cycler is designed to be equipped with an interchangeable clip attachment, therefore, allowing it to be secured to numerous advantageous points such as a molle equipped vest or duty belt, while emphasizing safe manipulation under compromising circumstances, or training purposes, thus promoting enhanced operational stability.

Basic 1" Depth - Single Handed Firearm Cycler

$65.00

Excluding Sales Tax |

Color: Black

Quantity

Limited Lifetime Warranty

For the Single-Handed Firearm Cycler

1. WARRANTY COVERAGE

Trihand Industries warrants that the Single-Handed Firearm Cycler (“the product”) will be free from defects in materials and workmanship for the lifetime of the original purchaser, under normal use and proper installation.

This warranty applies only to the original retail purchaser and is non-transferable.

2. WHAT IS COVERED

Manufacturing defects
Material failures under standard operating conditions
Structural integrity during intended use on compatible firearms

If a product is found to be defective under normal use, Trihand Industries will, at its discretion:

Replace it with the same or equivalent model

3. WHAT IS NOT COVERED

This warranty does not cover:

Normal wear and tear
Cosmetic damage after or during installation
Damage caused by:
- Misuse, abuse, or neglect
- Improper installation or forceful application
- Use with non-compatible firearms
- Unauthorized modifications or alterations
- Environmental exposure (e.g., corrosion due to improper storage)
Damage from ammunition malfunctions
Return requests due to buyer error (e.g., ordering the wrong model, firearm incompatibility)

4. WARRANTY CLAIMS PROCESS

To initiate a warranty claim:

Contact returns at trihandreturns@gmail.com with proof of purchase and detailed photos of the issue.
Our team will evaluate the claim.
Approved items must be returned to Trihand Industries for inspection.
If the claim is approved, a replacement will be processed at no cost.

Customer is responsible for return shipping unless otherwise specified.

5. RESTOCKING FEES (APPLICABLE TO NON-WARRANTY RETURNS)

Returns (e.g., customer error, incompatible firearm, opened product with no defect) are subject to a restocking fee to offset inspection, repackaging, and reconditioning costs.

Condition of Returned Item	Restocking Fee
Opened but unused	15%
Installed or test-fitted	25%
Damaged or modified	Not returnable
Unopened and sealed (within 14 days)	No fee
Defective (approved warranty claim)	No fee

6. DISCLAIMER OF LIABILITY

Trihand Industries is not liable for any incidental, consequential, or punitive damages arising from the use, misuse, or inability to use the product.

By using the product, you acknowledge and agree to assume full responsibility for the risks associated with firearm handling and modification.

📞 NEED HELP?

Trihand Industries Returns
trihandreturns@gmail.com

Trihand Industries — Single-Handed Firearm Cycler Disclaimer

LEGAL LIABILITY DISCLAIMER

Trihand Industries assumes no liability for any accidents, injuries, or damages arising from misuse or failure to follow safety instructions associated with the single-handed firearm cycler. The user is fully responsible for:

Safe handling and operation of the cycler and the firearm.

Verifying proper attachment, fit, and compatibility of the cycler.

Regular inspection for wear, damage, or malfunction.

By purchasing or using Trihand Industries products, you acknowledge the inherent risks of firearms handling and agree that Trihand Industries is not liable for injuries, death, or property damage resulting from improper use, neglecting instructions, or misuse of the product.

Users must comply with all applicable federal, state, and local laws regarding firearm accessories in their jurisdiction.

TRAINING AND PRACTICE

The single-handed firearm cycler is designed for a specific purpose: enabling firearm manipulation with one hand. This requires adequate training to ensure safe, effective use.

Seek training from qualified professionals—certified firearms instructors, law enforcement academies, or recognized safety programs.

Practice drills in controlled environments to build proficiency, especially under simulated stress or injury scenarios.

Do not rely on the cycler without confirming reliability through repeated, safe practice sessions with an unloaded firearm.

PROPER FIT AND MAINTENANCE

Improper fit or unauthorized modifications can lead to dangerous malfunctions.

Use the cycler only with firearm models verified by Trihand Industries for compatibility.

Refrain from modifying, cutting, heating, or altering the cycler or its attachments.

Conduct routine inspections—check for cracks, loosened hardware, or compromised materials—and stop use immediately if any issues arise.

Never place a loaded firearm in use with the cycler unless you have confirmed, with an unloaded firearm, that the cycler functions correctly and safely.

FIREARM SAFETY PRINCIPLES

Always adhere to the following core rules:

Treat every firearm as if it's loaded.

Never point the firearm at anything you do not intend to destroy.

Keep your finger off the trigger until you intend to shoot.

Be sure of your target and what lies beyond it.

ENVIRONMENTAL AND USAGE CONDITIONS

Avoid exposing the cycler to extreme temperatures, moisture, or corrosive substances (e.g., oils, solvents).

Keep the cycler clean and dry; environmental damage can affect its integrity and performance.

CHILD SAFETY AND UNAUTHORIZED USERS

This product is not a toy. Keep out of reach of children and unauthorized persons. Always store your firearm and cycler securely, such as in a locked safe when not in use.

CONTINUED USAGE AND LIABILITY

No device fully mitigates all risks. The single-handed firearm cycler is not foolproof, and failure scenarios may occur. Regardless of physical condition or environment, always exercise caution, especially in high-stress or physically impaired situations.

QUESTIONS OR CONCERNS?

For guidance on fit, use, training, or any safety concerns, please contact Trihand Industries Customer Support at: Trihandindustries@gmail.com
SETUP & OPERATIONAL USE

1. Mounting the Firearm Cycler

Properly secure the cycler to the provided clip. Next, secure the cycler to a stable surface (Supportive Belt or Ballistic Vest).

Ensure the mounting bracket is locked and tightly secured with minimal to no movement; and all moving parts are free from debris.

2. Positioning the Firearm Cycler

The front belt line or duty belt area is ideal for placing a single-handed firearm cycler because it allows both hands to access and use the device regardless of injury.

Side-of-belt placement restricts access for the opposite hand, increasing the risk of failure in real-life scenarios where one hand may be disabled.

In an emergency, having your gear in the most universally accessible and mechanically efficient position can make the difference between life and death.

If you're training or setting up gear for injured shooter drills or combat scenarios, centerline-access tools (like a one-handed racking platform or notch) should always be evaluated for their positioning, accessibility, and reliability under stress.

3. Loading and Cycling

Insert the magazine with live rounds securely into the firearm.

Align the firearm slide with the Cycler’s guide rails or outer notches.

Apply even, firm pressure to cycle the slide using one-handed force through the device.

CAUTION: Do not cover the ejection port and keep finger off the trigger during cycling. The trigger guard must remain outside the device clearance zone.
Permitted Calibers for Use with Trihand’s Single-Handed Firearm Cycler

Common Defensive Calibers (Centerfire)

9mm Luger (9x19mm)

.40 S&W

.45 ACP

.380 ACP

10mm Auto

.357 SIG

Compact / Backup Gun Calibers

.32 ACP

.25 ACP (if firearm has sufficient slide mass for racking function)

Select Rimfire Calibers

.22 LR (only if firearm has a slide with sufficient resistance for effective cycling—note: rimfire slides can be lightweight and unreliable with some cycler models)

Calibers NOT Recommended or Unsupported

Trihand does not currently support the use of the cycler with:

Revolvers (no cycling slide to interface with)

High-power or rifle-caliber pistols (e.g., .44 Magnum, .50 AE, 5.7x28mm)

Non-standard competition calibers (e.g., .38 Super Comp, 9x21mm)

Modified or ported slides that lack proper surface engagement

Suppressed or compensated pistols where cycling pressure is affected

Notes on Compatibility

Always verify firearm compatibility before use with a confirmed unloaded weapon.

Cycling may vary based on recoil spring tension, slide mass, and frame design.

INCOMPATIBLE PLATFORMS / LIMITATIONS

Not Supported	Reason
Revolvers	No cycling slide present
Micro-Compacts w/ ported slides	May lack sufficient grip surface
Heavily customized slides	May interfere with proper alignment
Suppressor-ready models with thread protectors or extended barrels	May impede forward motion or slide fit
Compensated pistols	Altered gas pressure can affect slide behavior
Aftermarket slides without front serrations	May cause slippage or alignment failure
Pistols with optic-only slides (no rear notch)	Mounting may be obstructed

SAFETY REMINDERS

For Use with the Trihand Industries Single-Handed Firearm Cycler

The Trihand Single-Handed Firearm Cycler is a specialized tool designed to assist with one-handed firearm manipulation. Improper use can lead to injury, property damage, or death. Always follow these safety reminders.

1. Treat Every Firearm as Loaded

Always assume the firearm is loaded, even if you believe it is not.

Visually and physically inspect the chamber before use, installation, or training.

2. Never Point the Muzzle at Anything You Do Not Intend to Destroy

Maintain strict muzzle discipline while using the cycler.

Be aware of where the muzzle is directed during one-handed manipulation.

3. Keep Your Finger Off the Trigger

Do not place your finger on the trigger until your sights are on the target and you are ready to fire.

During cycling or slide manipulation, trigger discipline is critical.

4. Know Your Target and What’s Beyond It

Ensure a safe backstop when training or firing.

Avoid using the cycler in unsafe environments (e.g., indoors without a proper range or backstop).

5. Practice Only with an Unloaded Firearm First

Perform all initial testing and training with an unloaded firearm or inert training rounds (dummy rounds).

Confirm the cycler does not interfere with slide movement, ejection, or lockback before any live fire use.

6. Use Proper Protective Gear

Wear eye and ear protection at all times during live fire or practice.

One-handed manipulation increases the risk of dropped firearms or unexpected discharge—protect yourself accordingly.

7. Check Fit and Function Before Use

Confirm the cycler is securely mounted and properly aligned with the firearm.

Do not use if the cycler is loose, damaged, or misaligned.

Only use with approved firearm models and calibers. (See Compatibility Guide)

8. Do Not Modify the Cycler

Unauthorized modifications can compromise safety and void any warranty.

Only use OEM (original) parts with your firearm while using the cycler.

9. Train Under Supervision

Seek instruction from a certified firearms instructor, especially if you are training for injured-shooter, duty, or defensive use.

Practice under controlled, supervised conditions before integrating into real-world carry or duty use.

10. Not a Substitute for Safe Gun Handling

The cycler is an assistive tool, not a replacement for core firearm skills or training.

One-handed manipulation introduces additional risks—do not attempt advanced drills without proper training.

Always Inspect Before Use

Check the cycler and firearm for wear, damage, or debris before and after each use.

Stop using immediately if performance is inconsistent or impaired.

Questions or Concerns?

Contact Trihand Industries Support:
trihandindustries@gmail.com

North America Security Associates llc

Basic 1" Depth - Single Handed Firearm Cycler

Warranty

Disclaimer

Setup & Operational Use

Permitted Calibers

Incompatible Platforms/ Limitations

Safety Reminders